Floor Patching: VertHor

The VertHor line is designed to manage the building distribution of a riser cable to subscribers as part of FTTH deployments.

Main functions :

• Clamping of riser cable Ømax 14mm to right or left* with open cable protection and on-demand fiber extraction management
• Clamping of up to 12 SC or LC Duplex preterminated drop cables*
• Management of excess lengths with storage space
• Horizontal or vertical wall mounting by screws (provided) inside or outside the housing

* The 12-connector version can only be used in riser cable termination, unlike the 8-connector version which can be also used in extraction.

Composition :
The VertHor is built around a base and a cover, to which are added the cassettes and a façade with connectors answering to the selected wiring architecture.
Optionally, it can incorporate 2 ¼ turn screws to secure the closure.

Cabling :
The VertHor is optimized for extraction installation, but it is also compatible with termination and midspan configurations.
In the body, various zones of coiling make it possible to manage bundles and 900μm fibers connected or waiting to avoid any incident when connecting a new subscriber.

The pure patching configuration proposed allows a connection of up to 24 subscribers on demand (using LC duplex).

The patching and splicing configuration allows a connection of the subscribers on demand in a common tray of capacity 12** splices compatible fibers G652D / G657A.
** These cassettes are compatible with mechanical splices and ANT

VertHor is able to manage up to 2 Gas-stop for clamping duct (up to 14 mm) as shown below :

##image:112874:center##

These covers are used to fix the VertHor along a PVC cable way to have a perfect finish by hiding drop and riser cables.

The kit is composed with 2 covers for up and down.

Nexans reference : 10192633

These sealing is used to have a better protection regarding dust and water, it gives to the VertHor an IP level at IP42.

The kit is composed with 4 sealing, 2 small for riser and 2 wider for drops to protect up and down.

Nexans reference : 10179110

These sealing is used to have a better protection regarding dust and water, it gives to the VertHor an IP level at IP42.

The kit is composed with 4 sealing, 2 small for riser and 2 wider for drops to protect up and down.

Nexans reference : 10179110