LANsense NGA Analyser Card
Norma, StandardInternational : ISO/IEC 11801
Each analyser card (AC) supports 2 x 24 port devices such as patch panels, presentation panels (port replication panels) or integration strips.
Every analyser card is supplied with system indication LEDs and connects to the 3U card cage using a Eurocard connector
The AC is under the supervisory control of the SMC. The AC is connected via the Analyzer Bus over the RS485 bus. Communication uses a serial IP protocol.
The primary function of the AC is to scan ports connected to it by sending and receiving a pulse through the 9th wire. The data collected by the AC will carry the patch matrix information of ports in the Patch Zone.
Each AC consists of 48 I/O ports which will be connected to the sensor pad on the patch panel. It is capable of detecting port patch connectivity between 2 sensor pads or multiple patching (max. of 8)
Connectors 96 Pin Euro Connector (CN2): AC interface
|Złącze WE/WY - Analizator||Type C|